Ceramapanel
Suited to a variety of applications such as residential, commercial and industrial buildings, Ceramapanel fibre cement boards are a cost-effective and easy to install natural facade solution.
The Ceramapanel cladding panels are a long lasting, low maintenance choice that provide a highly durable, yet natural finish. Ceramapanel is available as standard as a non-combustible A1 rated (to BS EN 13501-1) solution, as well as an A2-s1, d0 rated option where the project allows.
- A1 and A2 fire rated options to BS EN 13501-01
- Highly durable, impact resistant and long-lasting
- Width - 1220 or 1250mm (custom widths on request)
- Length - 2500 or 3050mm (custom lengths on request)
- Thickness - 8, 10 or 12mm
- Weight - 8mm = 14.4kg/m2, 10mm = 18kg/m2 and 12mm = 21.6kg/m2
- Available in a vast range of colours and finishes - please note, due to the nature of the raw material, the panels may show variation in tone and appearance
To ensure the best finish, Ceramapanel can be installed using a secret or rivet fix system.
Secret Fix
The secret fix option is available using the 10 or 12mm thick cladding panels. The brackets are installed to the back of the panel, which are then located onto the rails.
Rivet Fix
The rivet fix option is available using the 8, 10 or 12mm thick cladding panels. The panels are installed back to the carrier system and then secured in place using colour matched rivets.
Ceramapanel is CWCT tested and available in A1 or A2 options to suit different project requirements.
Ceramapanel supports sustainability across its entire lifecycle. The panels are 100% recyclable at the end of their 60+ year lifespan and have a low carbon footprint. As part of a rainscreen system, the panels protect buildings from weather, improving their thermal performance and energy usage.
Ceramapanel fibre cement cladding is available in 26 colours across two through-coloured ranges, Natural and Natural+. Panels are also available in customised painted RAL colours.
Natural: resembles nature's earthy tones and has a more stone-like finish. The Natural range is available in the following finishes: Raw, Sandblasted, Shot-Sawn, Touch, Contour Groove and Contour Lines.
Natural+: available in the same colours as the Natural range, this range is finished with an alkali-resistant coating which makes the panels graffiti resistant. The coating gives the panels a deeper tone and allows them to be cleaned more easily. Only available with the Textures Raw finish.
Find out more about the design options below.
This range features a panel that contains 2mm deep grooves, 20mm apart - custom spacing is also available. This finish is available using the 10 or 12mm panels and a selection of the Natural colour range is available with this surface finish.
This range features a panel that also contains 2mm deep grooves, 160mm apart to provide the appearance of timber planks. This panel is also available in the Raw and Touch surfaces. This finish is available using the 10 or 12mm panels and a selection of the Natural colour range is available with this surface finish.
This range features a smooth sanded face finish that is ideally suited to clean and contemporary project designs. This range includes 13 Natural colours.
This range features a smooth face with a mottled effect for a slightly more weathered finish. A selection of the Natural colour range is available with this surface finish.
This range features a lightly pitted face, providing a textured finish. A selection of the Natural colour range is available with this surface finish.
This range features a textured face with a ribboned effect and grooved finish, providing a non-combustible alternative to timber cladding. A selection of the Natural colour range is available with this surface finish.
This range features a variety of painted panels in a selection of standard colours that achieve an A1 fire rating.
This range features a variety of painted panels in a selection of standard colours that achieve an A2-s1, d0 fire rating. Textured options are also available in this range, as well as painted edges on request.
This range consists of panels which can printed to provide the effect of natural stone or timber, as well as complete images. This range has 6 standard finishes with endless customised options available on request.
